Hyundai Palisade (LX2): Automatic Transaxle System (A8LF1)
- Specifications
- Special service tools
- Troubleshooting
- Automatic Transaxle System
- Hydraulic System
- Description and operation
- Components and components location
- Electronic Oil Pump (EOP)
- Valve Body
- Torque Converter Clutch Control Solenoid Valve (T/CON_VFS)
- 46 Clutch Control Solenoid Valve (46/C_VFS)
- 37R Clutch Control Solenoid Valve (37R/C_VFS)
- 28 Brake Control Solenoid Valve (28/B_VFS)
- UD Clutch Control Solenoid Valve (UD/C_VFS)
- OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS)
- ine Pressure Control Solenoid Valve (LINE_VFS)
- SS-A Solenoid Valve (SS-A_ON/OFF)
- Automatic Transaxle Cooling System
- Automatic Transaxle Control System
Repair procedures Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2.
Specifications Item Specifications Engine type Gasoline 3.8GDI Automatic transaxle type A8LF1 Clutch type Torque converter Drive system 2WD/4WD Gear ratio 1st 4.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Evaporator Temperature Sensor
Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. Repair procedures Inspection 1.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Blower Motor
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear blower motor connector (A), loosen the mounting screws and remov
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Rain Sensor
- Engine Electrical System
- Automatic Transaxle Fluid (ATF)
- New on site
- Most important about car
