Hyundai Palisade (LX2): Automatic Transaxle System (A8LF1) / Special service tools

Special Service Tools
Tool Name / Number
Illustration
Description
09200-3N000
Engine support fixture (Beam)

Hyundai Palisade. Special service tools

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001 or 09200-3N000) with the supporter (SST No. : 09200-2S000).
09200-2S000
Engine support fixture (Supporter)

Hyundai Palisade. Special service tools

Removal and installation of the transaxle.
Use this supporter (SST No. : 09200-2S000) with the beam (SST No. : 09200-38001 or 09200-3N000).
09453-3L240
Oil seal installer

Hyundai Palisade. Special service tools

2WD : Installation of the differential oil seal in the transaxle case and housing side
4WD : Installation of the differential oil seal in the housing side
[Using with bar (SST No.:09231-H1100)]
09430-B8100
Oil seal installer

Hyundai Palisade. Special service tools

4WD : Installation of the differential oil seal in the housing side
[Using with bar (SST No.:09231-H1100)]
09231-H1100
Bar

Hyundai Palisade. Special service tools

Installation of the differential oil seal in the transaxle case and housing side.
[Using with oil seal installer]
09459-4G100
Position sensor neutral fixed jig

Hyundai Palisade. Special service tools

Used to align the neutral position when installing the position sensor.

    Specifications Item Specifications Engine type Gasoline 3.8GDI Automatic transaxle type A8LF1 Clutch type Torque converter Drive system 2WD/4WD Gear ratio 1st 4.

    Troubleshooting Limp Home Mode • Features a fail-safe function that prevents dangerous situations in the event of a transaxle failure.

    Other information:

    Hyundai Palisade (LX2) 2020-2025 Service Manual: In-car Sensor

    Description and operation Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, is delivered to heater co

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Description and operation

    Description Surround View Monitor (SVM) is the system that allows video monitoring of 360 degrees around the vehicle. The system includes 4 ultra optical camera mounted around the vehicle (front, both sides, rear). The video from these cameras are applied with distortion compensation, time point conversion, and video me

    Categories

     
    Copyright © 2025 www.hpalisadelx.com - 0.0142