Hyundai Palisade (LX2): Power Liftgate / How to reset the power liftgate
If the battery has been discharged or disconnected, or if the power liftgate fuse has been replaced or removed, reset the power liftgate by performing the following procedure:
1. Press the P (Parking) button.
2. Press the power liftgate inner button and the power liftgate outer handle button simultaneously for more than 3 seconds. The chime will sound.
3. Close the liftgate manually.
If the power liftgate does not work properly after the above procedure, have the system checked by an authorized HYUNDAI dealer.
NOTICE
When operating the power liftgate, the gear shift button must be in the (P) park position in order to operate normally.
During power opening and closing if the power liftgate is blocked by an object or part of the body, the power liftgate may be able to detect the resistance.
Follow the instructions below to set the fully open height of the power liftgate: 1. Position the liftgate manually to the height you prefer. 2. Press the power liftgate inner button for more than 3 seconds.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: A/C Pressure Transducer
Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Blower Motor
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear blower motor connector (A), loosen the mounting screws and remov
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Power Outlet
- Automatic Transaxle System (A8LF1)
- Engine Mechanical System
- New on site
- Most important about car
