Hyundai Palisade (LX2): Automatic Transaxle System (A8LF1) / Hydraulic System
- Description and operation
- Components and components location
- Electronic Oil Pump (EOP)
- Valve Body
- Torque Converter Clutch Control Solenoid Valve (T/CON_VFS)
- 46 Clutch Control Solenoid Valve (46/C_VFS)
- 37R Clutch Control Solenoid Valve (37R/C_VFS)
- 28 Brake Control Solenoid Valve (28/B_VFS)
- UD Clutch Control Solenoid Valve (UD/C_VFS)
- OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS)
- ine Pressure Control Solenoid Valve (LINE_VFS)
- SS-A Solenoid Valve (SS-A_ON/OFF)
Components and components location Components Location 1. ATF Injection plug (Eyebolt) 2. ATF injection plug gasket 3.
Description • The hydraulic system consists of a valve body, an oil filter and an oil pump. • The oil pump is powered by the engine.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Blower Unit
Components and components location Components Location 1. Blower unit assembly Components 1. Intake seal 2. Intake upper case 3. Intake actuator 4. Intake door 5.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Intake Actuator
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Automatic Transaxle System (A8LF1)
- Body (Interior and Exterior)
- Engine Mechanical System
- New on site
- Most important about car
