Hyundai Palisade (LX2): Body (Interior and Exterior) / Crash Pad

Components and components location Component Location 1. Console armrest Repair procedures Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Components (1) 1. Crash pad side cover [LH] 2. Crash pad lower panel 3. Crash pad side cover [RH] 4. Crash pad assembly Componets (2) 1.

Other information:

Hyundai Palisade (LX2) 2020-2026 Service Manual: A/C Pressure Transducer

Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.

Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor

Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

Categories

 
Copyright © 2026 www.hpalisadelx.com - 0.02