| Component Location |

| 1. Main crash pad assembly
|
Components and components location Component Location 1. Crash pad center panel Repair procedures Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Components and components location Component Location 1. Cowl cross bar assembly
Repair procedures SReplacement 1. Remove the condenser. (Refer to A/C System - "Condenser") 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 2.
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after set