Hyundai Palisade (LX2): Suspension System / Rear Suspension System
- Components and components location
- Rear Shock Absorber
- Rear Upper Arm
- Rear Lower Arm
- Rear Coil Spring
- Trailing Arm
- Rear Assist Arm
- Rear Stabilizer Bar
- Rear Cross Member
Repair procedures Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2.
Components 2WD 1. Rear shock absorber 2. Rear lower arm 3. Rear stabilizer bar 4. Rear cross member 5.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Temperature Control Actuator
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear temperature actuator connector (A), loosen the mounting screws a
Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation
Description • PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Rain Sensor
- Maintenance
- Removing and Storing the Spare Tire
- New on site
- Most important about car
