Hyundai Palisade (LX2): Body (Interior and Exterior) / Body Side Molding

Repair procedures Replacement [Rear door side weatherstrip] 1. Loosen the rear door checker (B) mounting bolt.

Components and components location Component Location 1. Rear spoiler Repair procedures Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Other information:

Hyundai Palisade (LX2) 2020-2026 Service Manual: A/C Pressure Transducer

Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.

Hyundai Palisade (LX2) 2020-2026 Service Manual: Intake Actuator

Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Categories

 
Copyright © 2026 www.hpalisadelx.com - 0.0177