Hyundai Palisade (LX2): Body Electrical System / AVN System

Removal 1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 2. Remove the bolts and disconnect the horn connectors (C), then remove the high pitch horn (B) and low pitch horn (A).

Specifications Item Specification Power source DC 14.4V (-) ground Frequency range / Channel space FM : 87.

Other information:

Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor

Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation

Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.

Categories

 
Copyright В© 2026 www.hpalisadelx.com - 0.0194