Hyundai Palisade (LX2): Emission Control System
- Specifications
- Description and operation
- Troubleshooting
- Schematic diagrams
- Components and components location
- Crankcase Emission Control System
- Evaporative Emission Control System
- Description and operation
- Schematic diagrams
- Canister
- Purge Control Solenoid Valve (PCSV)
- Fuel Tank Air Filter
- Fuel Filler Cap
- Exhaust Emission Control System
Repair procedures Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2.
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 18.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Receiver-Drier
Repair procedures SReplacement 1. Remove the condenser. (Refer to A/C System - "Condenser") 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 2.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Mode Control Actuator
Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Automatic Transaxle System (A8LF1)
- Lift and Support Points
- Automatic Transaxle Fluid (ATF)
- New on site
- Most important about car
