Hyundai Palisade (LX2): Evaporative Emission Control System / Fuel Tank Air Filter
Repair procedures
| Removal |
| 1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the vent hose quick-connector (B), the vapor hose quick-connector
(A) from the canister.
|
| 3. |
Remove the fuel tank air filter assembly after removing the mounting
bolts (C).
|
| 4. |
Remove the fuel tank air filter mounting bolt (A).
|
| 5. |
Remove the clip, and then separate the fuel tank air filter (B) from
the canister after rotating it in the direction of the arrow in the
figure.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Specifications Specification Item Specification Coil Resistance (Ω) 18.5 - 22.
Description and operation Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Photo Sensor
Description and operation Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received wh
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Heater Core
Repair procedures Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2. Loosen the mounting screws and remove the rear heater core cover (A).
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Components and components location
- Cylinder Head
- Brake bleeding procedures
- New on site
- Most important about car
