Hyundai Palisade: Body Electrical System / AVN System
- Specifications
- Components and components location
- Description and operation
- AVN Head Unit
- Speakers
- External Amplifier
- Roof Antenna
- AVN Keyboard Assembly
- USB jack
- Steering Wheel Remote Controller (SWRC)
Repair procedures
Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Remove the bolts and disconnect the horn connectors (C), then remove
the high pitch horn (B) and low pitch horn (A)...
Specifications
Specifications
Item
Specification
Power source
DC 14.4V (-) ground
Frequency range / Channel space
FM : 87...
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures
Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Hyundai Palisade (LX2) 2020-2025 Owner's Manual: High Beam Assist (HBA), AUTO HOLD, Cruise, SPORT Mode indicator lights
High Beam Assist (HBA) indicator light This indicator light illuminates : When the high-beam is on with the light switch in the AUTO light position. If your vehicle detects oncoming or preceding vehicles, the High Beam Assist (HBA) system will switch the high beam to low beam automatically...
Categories
- Manuals Home
- 1st Generation Palisade Owners Manual
- 1st Generation Palisade Service Manual
- Check Tire Pressure
- Side view mirror adjustment, Folding the side view mirrors
- How to reset the power liftgate
- New on site
- Most important about car
Manual adjustment
The front seat can be adjusted by using the levers located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.
Copyright © 2025 www.hpalisadelx.com