Components and components location Components Repair procedures Inspection 1. Disconnect the IMS control switch connector.
Component Location 1. Backlest motor 2. Front height motor 3. Cushion extension motor 4. Lumber support motor 5.
Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuato
Troubleshooting 1) After replacing H/UNIT, always check that the system operates properly. 2) If the failure persists after replacing the H/UNIT, do not replace the unit.