Hyundai Palisade (LX2): Body Electrical System / Smart Key System
- Specifications
- Components and components location
- Description and operation
- Smart Key
- Smart Key Unit
- Smart Key Diagnostic
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear roof trim.
Specifications Smart Key Unit Items Specification Rated voltage DC 12V Operating voltage DC 9 - 16V Operating temperature -22°F to 167°F (-30°C to- 75°C) Load Max.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Temperature Control Actuator
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear temperature actuator connector (A), loosen the mounting screws a
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Body (Interior and Exterior)
- Automatic Transaxle Fluid (ATF)
- Resetting the Driver's Seat Memory System
- New on site
- Most important about car
