Hyundai Palisade (LX2): Driver position memory system / Resetting the Driver's Seat Memory System

Take the following procedures to reset the driver's seat memory system, when it does not operate properly.

To reset the driver's seat memory system

1. Place the ignition switch to the ON position, shift to P (Park), and open the driver's door.

2. Operate the control switch to set the driver's seat and seatback to the foremost position.

3. Simultaneously press the SET button and push forward the seat movement switch over 2 seconds.

While resetting the driver's seat memory system

1. It starts with the notification sound.

2. The driver's seat and seatback is adjusted to the rearward position with the notification sound.

3. The driver's seat and seatback is re-adjusted to the default position (central position) with the notification sound.

However, in the following cases, the resetting procedure and the notification sound may stop.

- The memory button is pressed.
- The control switch is operated.
- The driving speed exceeds 2 mph (3 km/h).
- The driver's door is closed.

CAUTION

• If the reset is failed, initialize the system once again.
• Initialize the system after cleaning the obstacles surrounding of seat.
• After completing the initialization, adjust the driver position memory system again.

NOTICE

• Reattempt to do the resetting procedure again, when the resetting procedure incompletely stops or the notification sound do not stop.
• Make sure that there is no obstacle around the driver's seat in advance of resetting the driver's seat memory system.