Hyundai Palisade (LX2): Body Electrical System / Integrated Body Control Unit (IBU)
- Specifications
- Components and components location
- Schematic diagrams
- Description and operation
- Repair procedures
- IMS (Integrated Memory)
- IMS (Integrated Memory System) module
- IMS Control Switch
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2.
Specifications Items Specifications Rated voltage DC -40V Operating voltage DC -40V Operating temperature -40°C to 85°C (-22°F to 185°F) parastic current 4.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Troubleshooting
Troubleshooting 1) After replacing H/UNIT, always check that the system operates properly. 2) If the failure persists after replacing the H/UNIT, do not replace the unit.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Scheduled maintenance services
- Rain Sensor
- Automatic Transaxle Fluid (ATF)
- New on site
- Most important about car
