Hyundai Palisade (LX2): Accessing your vehicle / Smart Key
â– Type A
â– Type B
Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate.
1.Door Lock
2.Door Unlock
3. Remote start
4. Liftgate Unlock (if equipped)
5. Panic
- Locking your vehicle
- Unlocking your vehicle
- Remote start
- Opening the liftgate
- Panic button, Start-up, Mechanical key
- Loss of a smart key, Smart key precautions
- Battery replacement
If the remote key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery: 1.Insert a slim tool into the slot and gently pry open the cover.
To lock your vehicle using the door handle button or the Smart Key: 1.Make sure all doors, the hood and the liftgate are closed. 2.Make sure you have the smart key in your possession.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Mode Control Actuator
Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →
Hyundai Palisade (LX2) 2020-2026 Service Manual: Power Mosfet (DATC)
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Resetting the Driver's Seat Memory System
- Body (Interior and Exterior)
- Convenient Features of Your Vehicle
- New on site
- Most important about car
