Hyundai Palisade (LX2): Remote Key / Battery replacement
If the remote key is not working properly, try replacing the battery with a new one.
Battery Type: CR2032
To replace the battery:
1.Insert a slim tool into the slot and gently pry open the cover.
2.Using a screw driver, remove the battery cover.
3.Remove the old battery and insert the new battery. Make sure the battery position is correct.
4.Reinstall the battery cover and key cover in the reverse order of removal.
If you suspect your remote key might have sustained some damage, or you feel your remote key is not working correctly contact an authorized HYUNDAI dealer.
Information
An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations.
The remote key will not work if any of the following occur: The key is in the ignition switch. You exceed the operating distance limit (about 90 feet [30 m]).
â– Type A â– Type B Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. 1.Door Lock 2.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Wireless Charging Lamp
Components and positions Components Repair procedures Removal Handling wireless charging system parts by wet hands may cause electric shock.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Temperature Control Actuator
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear temperature actuator connector (A), loosen the mounting screws a
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Resetting the Driver's Seat Memory System
- Rain Sensor
- General Tightening Torque Table
- New on site
- Most important about car
