Hyundai Palisade (LX2): Smart Key / Remote start

You can start the vehicle using the remote start button (4) of the smart key.

To start the vehicle remotely :

- Lock the doors by pressing the door lock button (1) within 32 ft (10 m) distance from the vehicle.
- Press the remote start button for over 2 seconds within 4 seconds after locking the doors.

Press the remote start button once to turn off the vehicle.

Air conditioner/heater system maintains the status before turning off the vehicle.

If no further action for operating/driving the vehicle is taken, the vehicle will be turned off 10 minutes after starting the vehicle remotely.

CAUTION

  • Laws in your country may restrict the use of remote start. You should check country regulations before using this remote starting system.
  • It is only possible to start the vehicle remotely when shifted to P (Park).
  • If the hood or the liftgate is opened, you cannot start the vehicle remotely.
  • The Remote start function works the same as Blue Link remote start. For further caution information, refer to the separately supplied "Blue Link (Infotainment system) manual".

    To unlock your vehicle: 1.Make sure you have the smart key in your possession. 2.Press either the button on the door handle or the Door Unlock button (2) on the smart key.

    Non-power liftgate To unlock and open the liftgate: 1.Make sure you have the smart key in your possession. 2.Press either the liftgate handle release switch on the vehicle for more than one second.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Auto Defogging Sensor

    Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intak

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Mode Control Actuator

    Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0179