Hyundai Palisade (LX2): Instrument cluster / Warning and Indicator Lights
Information
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
- Seat Belt Warning Light, Air Bag Warning Light, Parking Brake & Brake Fluid Warning Light
- Anti-lock Brake System (ABS) Warning Light, Electronic Brake Force Distribution (EBD) System Warning Light
- Electric Power Steering (EPS) Warning Light, Malfunction Indicator Lamp (MIL), Electronic Parking Brake (EPB) Warning Light
- Charging System Warning Light, Engine Oil Pressure Warning Light, Low Fuel Level Warning Light
- Washer Fluid Warning Light, Master Warning Light, Low Tire Pressure Warning Light
- All Wheel Drive (AWD) Warning Light, Forward Collision- Avoidance Assist (FCA) System Warning Light, Lane Keeping Assist (LKA) System Indicator Light
- LED Headlight Warning Light, Icy Road Warning Light, AUTO STOP Indicator Light
- Electronic Stability Control (ESC) Indicator Light, Electronic Stability Control (ESC) OFF Indicator Light
- Immobilizer Indicator Light
- Turn Signal, High Beam, High Beam Indicator Lights
- High Beam Assist (HBA), AUTO HOLD, Cruise, SPORT Mode indicator lights
- SMART Mode, All Wheel Drive LOCK, Downhill Brake Control (DBC) Indicator Lights
Automatic transmission shift indicator This indicator displays the gear position of the shift button. ■ Type A ■ Type B Shift indicator pop-up (if equipped) The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
Seat Belt Warning Light This warning light informs the driver that the seat belt is not fastened. Air Bag Warning Light This warning light illuminates: When you set the ignition switch or the Engine Start/Stop button to the ON position.
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: A/C Pressure Transducer
Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Palisade (LX2) 2020-2025 Service Manual: Front View Camera Unit
Schematic diagrams Circuit Diagram Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the inside rear view mirror cover (A) and rain sensor cover (B).
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Brake System
- Specifications
- Specifications
- New on site
- Most important about car
