Hyundai Palisade (LX2): Driveshaft and axle / Rear Driveshaft Assembly
Components and components location Components 1. Rear brake disc 2. Rear hub assembly 3. Dust cover 4. Rear carrier assembly Repair procedures Removal 1.
Components and components location Components 1. Dust cover 2. BJ joint 3. BJ boot 4. BJ boot big part band 5.
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Intake Actuator
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear mode actuator connector (A), loosen the mounting screws and remove the rear mode ac
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Lift and Support Points
- Specifications
- Emergency Precautions
- New on site
- Most important about car
