| Description |
This system is a supplementary function only. It is the responsibility
of the driver or always check the inside/ outside rear view mirror and
the area behind the vehicle before and while backing up because there
is a dead zone that can't see through the camera.
|
Circuit Diagram
Removal SVM Rear Camera • In case of bad quality or poor focus, be sure to check the camera lense surface condition and foreign materials.
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information.