Hyundai Palisade: Convenient Features of Your Vehicle / LCD Display (Cluster type A and type B)
LCD Display Control

The LCD display modes can be
changed by using the control buttons.
(1)
: MODE button for changing
modes
(2)
,
: MOVE switch for
changing items
(3) OK : SELECT/RESET button for
setting or resetting the
selected item
Shift to P or N to start engine
(for smart key system)
This warning message is displayed if
you try to start the engine with the
shift button not in the P (Park) or N
(Neutral) position...
Other information:
System Standby
The Driver Attention Warning (DAW)
system enters the ready status and
displays the 'Standby' screen in the
following situations.
- The system is unable to collect
data to monitor the driver's driving
conditions.
- Driving speed remains under 40
mph (64 km/h) or over 110 mph
(180 km/h)...
Components and components location
Component Location
Second line Seat
Luggage Side Trim
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
Actuator
1.
Remove the rear seat...
Categories

The SRS consists of the following
components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side air bag modules
4. Curtain air bag modules
5. Retractor pre-tensioner
6. Air bag warning light
7. SRS control module (SRSCM)/
Rollover sensor
8. Front impact sensors
9. Side impact sensors
10.Side pressure sensors
11. Occupant classification system
12. Driver’s knee airbag module
read more