Hyundai Palisade (LX2): Driver Attention Warning (DAW) system / Resetting the System
- The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system.
- The Driver Attention Warning
(DAW) system resets in the following
situations.
- The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.
- The vehicle is stopped for more than 10 minutes. - The Driver Attention Warning (DAW) system operates again, when the driver restarts driving.
System setting The Driver Attention Warning can be activated from the User Settings menu in the cluster LCD display by following the procedure below.
System Standby The Driver Attention Warning (DAW) system enters the ready status and displays the 'Standby' screen in the following situations. - The system is unable to collect data to monitor the driver's driving conditions.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation
Description Surround View Monitor (SVM) is the system that allows video monitoring of 360 degrees around the vehicle. The system includes 4 ultra optical camera mounted around the vehicle (front, both sides, rear). The video from these cameras are applied with distortion compensation, time point conversion, and video me
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Automatic Transaxle Fluid (ATF)
- Lift and Support Points
- Rain Sensor
- New on site
- Most important about car
