Component Replacement after Deployment • Before doing any SRS repairs, use the GDS to check for DTCs.
Components 1. Supplemental Restraint System Control Module (SRSCM) 2. Rear Gravity side Impact Sensor (G-SIS) 3.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing Cover") 3.
Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →