Hyundai Palisade: Airbag Module / Side Airbag (SAB) Module
Components and components location

Description and operation
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when a side crash occurs. The SRSCM determines
deployment of the side airbag by using the Side Impact Sensor (SIS) signal.
• |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Components and components location
Components
[LHD]
1. Passenger airbag (PAB)
Description and operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects the
front passenger in the event of a frontal crash...
Components and components location
Components
1. Curtain Airbag (CAB)
Repair procedures
Removal
1...
Other information:
Description and operation
Description
•
When TCM supplies variable current to solenoid valve, the solenoid valve
operates and controls the speed range.
•
SS-A solenoid valve is ON/OFF type...
You can check the tire pressure in
the Assist mode on the cluster.
Refer to the "LCD Display
Mode" section in chapter 3.
A "Drive to display" message will
appear for the first few minutes of
driving after initial engine start up.
If the tire pressure is not displayed
after a few minutes of driving,
check the tire pressures...
Categories

Front air bags
Front air bags and the driver's knee
air bag are designed to inflate in a
frontal collision depending on the the
severity of impact of the front collision.


read more