Hyundai Palisade: Automatic climate control system / Manual Temperature Control Mode

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Convenient Features of Your Vehicle / Automatic climate control system / Manual Temperature Control Mode

The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected.

When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically.

1. Start the engine.

2. Set the mode to the desired position. To improve the effectiveness of heating and cooling, select the mode according to the following:

- Heating: Hyundai Palisade. Mode
- Cooling: Hyundai Palisade. Mode

3. Set the temperature control to the desired position.

4. Set the air intake control to Fresh mode.

5. Set the fan speed control to the desired speed.

6. If air conditioning is desired, turn the air conditioning system on.

7. Press the AUTO button to convert to full automatic control of the system.

Automatic Temperature Control Mode

The Automatic Climate Control System is controlled by setting the desired temperature. For your convenience and to improve the efficiency of the climate control, use the AUTO button and set the temperature to 72°F (22°C)...

Mode selection

The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet direction is cycled as follows: Face-Level (B, D) Air flow is directed toward the upper body and face...

Other information:

Hyundai Palisade (LX2) 2020-2024 Service Manual: Radiator Grill


Components and components location Component Location 1. Radiator grill Repair procedures Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Hyundai Palisade (LX2) 2020-2024 Service Manual: Rear Wheel Speed Sensor


Components and components location Components [2WD] 1. Front wheel speed sensor [4WD] 1. Rear wheel speed sensor 2. Rear wheel speed sensor connector Repair procedures Removal    • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

Categories

Air bag inflation conditions

Hyundai Palisade. Air bag inflation conditions

Front air bags

Front air bags and the driver's knee air bag are designed to inflate in a frontal collision depending on the the severity of impact of the front collision.

Hyundai Palisade. Air bag inflation conditions

Hyundai Palisade. Air bag inflation conditions

read more


 
Copyright © 2024 www.hpalisadelx.com