Hyundai Palisade: Manual Temperature Control Mode / Air intake control (12)

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Convenient Features of Your Vehicle / Automatic climate control system / Manual Temperature Control Mode / Air intake control (12)

The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air).

Recirculation mode

Hyundai Palisade. Air intake control (12)

When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected.

Fresh mode

Hyundai Palisade. Air intake control (12)

When Fresh mode is selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

Information

Operating the system primarily in Fresh mode is recommended. Use Recirculation mode temporarily only when needed.

Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield.

In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin and may promote formation of musty vent odor due to stagnant air.

WARNING

  • Continued use of the climate control system operation in Recirculation mode for a prolonged period of time may cause drowsiness to the occupants in the cabin. This may lead to loss of vehicle control which may lead to an accident.
  • Continued use of the climate control system operation in Recirculation mode with the A/C OFF may allow humidity to increase inside the cabin. This may cause condensation to accumulate on the windshield and obscure visibility.
  • Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead to serious injury or death.

    Instrument panel vents, Temperature control

    Instrument panel vents The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. The outlet vents can be opened or closed separately using the vent control lever...

    Fan speed control

    The fan speed can be set as desired by pushing the fan speed control button. More air is delivered with higher fan speeds. Pressing the OFF button turns off the fan...

    Other information:

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Center Pillar Trim


    Components and components location Component Location 1. Center pillar lower trim 2. Center pillar upper trim Repair procedures Replacement [Center pillar lower trim]    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Fuel Filler Door Release Actuator


    Repair procedures Removal 1. Remove the left luggage side trim. (Refer to Body - "Luggage Side Trim") 2. Disconnect the connector (A) and then remove the release actuator (B)...

    Categories

    Locking your vehicle

    Hyundai Palisade. Locking your vehicle

    To lock your vehicle using the door handle button or the Smart Key:

    1.Make sure all doors, the hood and the liftgate are closed.

    2.Make sure you have the smart key in your possession.

    read more


     
    Copyright © 2024 www.hpalisadelx.com