Hyundai Palisade (LX2): Body (Interior and Exterior) / Tailgate
- Repair procedures
- Tail Gate Assembly
- Tailgate Trim
- Tailgate Lift
- Tailgate Weatherstrip
- Tail Gate Back Panel
Components and components location Component Location 1. Hood latch assembly
Adjustment 1. Place the car on a flat surface and check whether the body and trunk lid are well-aligned. 2.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear mode actuator connector (A), loosen the mounting screws and remove the rear mode ac
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Rain Sensor
- Emergency liftgate safety release
- Power Outlet
- New on site
- Most important about car
