| Replacement |
|
| 1. |
Using a screwdriver, lift up slightly the socket clips (A) of both ends
on the lifter (B), and then remove the lifter from the bracket.
|
| 2. |
To install, reverse removal procedure.
|
Components and components location Component Location 1. Tailgate trim
Repair procedures Replacement 1. Remove the liftgate weatherstrip (A). • Do not apply sealant to the body.
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Schematic diagrams Circuit Diagram Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the inside rear view mirror cover (A) and rain sensor cover (B).