Panic button
Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights flash for about 30 seconds.
To cancel the panic mode, press any button on the remote key.
Start-up
For information, refer to the "Key Ignition Switch" section in chapter 5.
NOTICE
To prevent damaging the remote key:
Mechanical key

If the remote key does not operate normally, you can lock or unlock the driver's door by using the mechanical key.
To unfold the mechanical key, press the release button on the remote key.
To return the key to its stored position, press the release button and fold the key back into the remote key.
To unlock the liftgate : 1.Press and hold the Liftgate Unlock button (3) on the remote key for more than one second. 2.The hazard warning lights will blink two times and the liftgate will open.
The remote key will not work if any of the following occur: The key is in the ignition switch. You exceed the operating distance limit (about 90 feet [30 m]).
Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.
Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.