Hyundai Palisade (LX2): Automatic Transmission / Paddle Shifter (Manual Shift Mode)
The paddle shifter is available when the gear is in the D (Drive) position.
Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic shift mode to manual shift mode.
To change back to the automatic shift mode from manual shift mode, do one of the following:
- Gently depress the accelerator pedal for more than 5 seconds.
- Drive the vehicle under 6 mph (10 km/h).
- Pull and hold the right side paddle shifter.
Information
If the [+] and [-] paddle shifters are pulled at the same time, gear shift may not occur.
Never shift the gear from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never shift the gear into P (Park) when the vehicle is in motion.
Power Brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Cruise Control (CC) Switch
Components and components location Components 1. Remote control switch (Audio swtich) 2. Remote control switch (Cruise control switch) Schematic diagrams Circuit Diagram Repair procedures Removal 1.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Automatic Transaxle Fluid (ATF)
- Lift and Support Points
- Electronic Child Safety Lock System
- New on site
- Most important about car
