| Components |

| 1. Front driveshaft (LH) 2. Inner shaft bearing bracket |
3. Front driveshaft (RH) |
Components and components location Components [LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4.
Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.