Hyundai Palisade (LX2): Evaporative Emission Control System / Fuel Filler Cap
Description and operation
| Description |
A ratchet tightening device on the threaded fuel filler cap reduces the chances
of incorrect installation, which seals the fuel filler. After the gaskets on
the fuel filler cap and the filler neck flange contact each other, the ratchet
produces a loud clicking noise indicating that the seal has been set.
Repair procedures Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Intake Actuator
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Parking/View Switch
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover. (Refer to Body - "Floor Console Assembly") 3.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Body (Interior and Exterior)
- Rear Heater Unit
- Electronic Child Safety Lock System
- New on site
- Most important about car
Copyright В© 2026 www.hpalisadelx.com - 0.0243