Hyundai Palisade: Wireless Power Charger System / Specification
| Specifications |
|
Item |
Specification |
|
Rated voltage |
DC 12V |
|
Operating voltage |
DC 8.5 - 16V |
|
Operating temperature |
-86 to 167°F (-30 to 75°C) |
|
Dark current |
MAX 1mA |
|
Output power |
5 W |
|
Output frequency |
110 ± 5 kHz |
Other information:
Hyundai Palisade (LX2) 2020-2024 Service Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following...
Hyundai Palisade (LX2) 2020-2024 Service Manual: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer tor Body - "Front Bumper") 3. Disconnect the DRL connector (A)...
Categories
- Manuals Home
- 1st Generation Palisade Owners Manual
- 1st Generation Palisade Service Manual
- Auto Hold
- Wireless Cellular Phone Charging System
- To Activate the ISG System
- New on site
- Most important about car
Battery replacement
If the remote key is not working properly, try replacing the battery with a new one.
Battery Type: CR2032
To replace the battery:
Copyright © 2024 www.hpalisadelx.com