Hyundai Palisade (LX2): Seat Belt Restraint System / Stowing the rear seat belt
■ 2nd row seat (8 passenger vehicle)
■ 3nd row seat
• The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use.
■ 2nd row seat
■ 3nd row seat (if equipped)
• Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats.
After inserting the seat belt, tighten the belt webbing by pulling it up.
CAUTION
When using the seat belt, use it after taking it out of the guides.
If you pull the seat belt when it is stored in the guides, it may damage the guides and/or belt webbing.
To fasten your seatbelt: 1.Extract the tongue plate (A) from the hole on the belt assembly cover. 2.Insert the tongue plate (A) into the buckle (A’) until an audible “click" is heard, indicating the latch is locked.
Your vehicle is equipped with driver's and front passenger's Pre-tensioner Seat Belts (Retractor Pretensioner). The purpose of the pre-tensioner is to make sure the seat belts fit tightly against the occupant's body in certain frontal or side collision(s).
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Special service tools
Hyundai Palisade (LX2) 2020-2025 Service Manual: Troubleshooting
Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- AWD Operation
- Repair procedures
- Driver position memory system
- New on site
- Most important about car
