Hyundai Palisade (LX2): Seat Belts / Seat Belt Restraint System

WARNING

Improperly positioned seat belts may increase the risk of serious injury in an accident.Take the following precautions when adjusting the seat belt:

  • Position the lap portion of the seat belt as low as possible across your hips, not on your waist, so that it fits snugly.
  • Position one arm under the shoulder belt and the other over the belt, as shown in the illustration.
  • Always position the shoulder belt anchor into the locked position at the appropriate height.
  • Never position the shoulder belt across your neck or face.

❈ 7 passengers (A) - 2nd row : 1, 3 - 3rd row : 4, 5, 6 ❈ 8 passengers (B) - 2nd row : 1, 2, 3 - 3rd row : 4, 5, 6 As a reminder to the rear passenger, the rear passenger's seat belt warning lights will illuminate for approximately 6 seconds each time you turn the ignition switch ON regardless of belt fastening.

To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible "click" when the tab locks into the buckle.

Other information:

Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Temperature Control Actuator

Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear temperature actuator connector (A), loosen the mounting screws a

Hyundai Palisade (LX2) 2020-2026 Service Manual: Troubleshooting

Troubleshooting    1) After replacing H/UNIT, always check that the system operates properly. 2) If the failure persists after replacing the H/UNIT, do not replace the unit.

Categories

 
Copyright © 2026 www.hpalisadelx.com - 0.0146