Hyundai Palisade (LX2): Convenient Features of Your Vehicle / Steering wheel

Electric Power Steering (EPS)

The system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort.

Should you notice any change in the effort required to steer during normal vehicle operation, have the system checked by an authorized HYUNDAI dealer.

NOTICE

  • If the Electric Power Steering System does not operate normally, the warning light ( ) will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. Take your vehicle to an authorized HYUNDAI dealer and have the system checked as soon as possible.
  • When abnormality is detected in the electric power steering system, the steering assist function will stop. At this time, the warning light turns on or blinks on the cluster. The steering wheel may become difficult to control or operate. Have your vehicle checked immediately, after moving the vehicle to a safe zone.

Information

The following symptoms may occur during normal vehicle operation:

  • The steering effort may be high immediately after placing the ignition switch in the ON position. This happens as the system performs the EPS system diagnostics. When the diagnostics are completed, the steering wheel effort will return to its normal condition.
  • A click noise may be heard from the EPS relay after the ignition switch is in the ON or LOCK/OFF position.
  • Motor noise may be heard when the vehicle is at a stop or at a low driving speed.
  • When you operate the steering wheel in low temperatures, abnormal noise may occur. If the temperature rises, the noise will disappear. This is a normal condition.
  • When an error is detected from the EPS, the steering effort assist function will not be activated. Instrument cluster warning lights may be on or the steering effort may be high. If these symptoms occur, drive the vehicle to a safe area as soon as it is safe to do so. Have the system checked by an authorized HYUNDAI dealer as soon as possible.

The system will move the driver's seat automatically as follows: With remote key - It will move the driver's seat rearward and downward when the ignition key is removed.

Tilt Steering / Telescopic Steering When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face.

Other information:

Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures

Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.

Hyundai Palisade (LX2) 2020-2025 Service Manual: Surround View Monitor (SVM) Camera

Components and components location Components [Ultra Optical Camera - RH/LH] [Ultra Optical Camera - Front] [Ultra Optical Camera - Rear] Repair procedures Removal    • In case of bad quality or poor

Categories

 
Copyright © 2025 www.hpalisadelx.com - 0.013