Hyundai Palisade (LX2): Advanced Driver Assistance System (ADAS) / Special service tools
| Special Service Tools |
|
Tool Name / Number |
Illustration |
Description |
|
LKA Compensator (09890-3V100) |
|
Used for compensating front view camera unit |
|
Tolerance Compensation Plate for Surround View Monitoring (09957-CM100) |
|
Used to Tolerance Compensation for Surround View Monitoring (SVM) Camera |
|
Vertical measuring instrument (09964-C1200) |
|
Used to measure left/right tilts when automatic tolerance compensation for
front camera is performed. Use together with the (09890-3V100). However, do not use it if vertical measuring instrument (09958-3T060) is available. |
|
BCW Sensor Correction Tool Set (09958-3T500) |
|
Used to correct the blind-spot radar unit. |
|
Case, Manual, String (09958-3T120) |
|
Used to correct the blind-spot radar unit. Used to create a center line. |
|
Vertical Plumb (09958-3T010) |
|
Used to correct the blind-spot radar unit. Used to create a center line. |
|
Spirit Level (09958-3T070) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
BCW Unit Fixing Adaptor (09958-3T080) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
Digital Protractor (09958-3T090) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
Digital Inclinometer (09958-3T100) |
|
Used to correct the blind-spot radar unit. Used to measure the vertical angle. |
Description System Description Advanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and parking.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Heater Core
Repair procedures Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2. Loosen the mounting screws and remove the rear heater core cover (A).
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Troubleshooting
- Scheduled maintenance services
- Resetting the Driver's Seat Memory System
- New on site
- Most important about car
