Hyundai Palisade (LX2): Hood / Hood Insulator Pad

Repair procedures

Replacement
1.
Using a clip remover, remove the clips and then the hood insulator pad (A).
Hyundai Palisade. Repair procedures   
•
Be careful not to scratch the hood panel.

Hyundai Palisade. Repair procedures

2.
To install, reverse removal procedure.
Hyundai Palisade. Repair procedures   
•
Replace any damaged clips (or pin-type retainers).

    Components and components location Component Location 1. Hood assembly Repair procedures Replacement    • Be careful not to damage the hood and body.

    Repair procedures Replacement    • When removing and installing the hood lifter, an assistant is necessary.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Auto Defogging Actuator

    Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuato

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation

    Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. It also has a safety interrupt, engaged upon depressing brake or shifting select lever.

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0124