Hyundai Palisade (LX2): SMART Mode, All Wheel Drive LOCK, Downhill Brake Control (DBC) Indicator Lights / Downhill Brake Control (DBC) Indicator Light
This indicator light illuminates:
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- The Downhill Brake Control
Indicator Light illuminates for about
3 seconds and then goes off.
• When you activate the system by pressing the DBC button.
This indicator light blinks:
• When the DBC is operating.
This indicator light illuminates yellow:
• When there is a malfunction with the DBC system.
If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer.
SMART Mode Indicator Light This indicator light illuminates: • When you select ''SMART" mode as drive mode. All Wheel Drive LOCK Indicator Light This indicator light illuminates: When you set the ignition switch or the Engine Start/Stop button to the ON position.
Shift to P or N to start engine (for smart key system) This warning message is displayed if you try to start the engine with the shift button not in the P (Park) or N (Neutral) position.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Temperature Control Actuator
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear temperature actuator connector (A), loosen the mounting screws a
Hyundai Palisade (LX2) 2020-2026 Service Manual: Front Radar Unit
Specifications Specification Item Specification Power supply (V) 12 Operation voltage (V) 9 - 16 Description and operation Description The smart cruise control unit is installed on the front right-hand side of the chass
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Electronic Child Safety Lock System
- PTG Spindle
- Brake bleeding procedures
- New on site
- Most important about car
