Hyundai Palisade (LX2): Smart Liftgate / Detecting area

Hyundai Palisade. Detecting area

  • The Smart Liftgate detecting area extends approximately 20-40 inches (50-100 cm) behind the vehicle. If you are positioned in the detecting area and are carrying the smart key, the hazard warning lights will blink and the chime will sound for about 3 seconds to alert you that the smart liftgate will open.
  • The alert stops once the smart key is moved outside of the detecting area within the 3 second period.

Information

  • The Smart Liftgate function may not operate properly if any of the following instances occur:
    - The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.
    - The smart key is near a mobile two way radio system or a cellular phone.
    - Another vehicle's smart key is being operated close to your vehicle.
  • The Smart Liftgate detecting area may change when:
    - The vehicle is parked on an incline or slope
    - One side of the vehicle is raised or lowered relative to the opposite side

    1. Door lock 2. Door unlock 3. Liftgate open 4. Panic 5. Remote start If you press any button on the smart key during the Detect and Alert stage, the Smart Liftgate function will be deactivated.

    Opening the fuel filler door 1. Turn the engine off. 2. Ensure the driver's door is unlocked. 3. Push the fuel filler door near the 3 o'clock position.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: General safety information and caution

    Instructions (R-134a) When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite. When handling the refrigerant, be sure to wear gloves.

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Mode Control Actuator

    Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0212