Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer tor Body - "Front Bumper") 3.
Description and operation Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.