Hyundai Palisade (LX2): Daytime Running Lights / Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer tor Body - "Front Bumper")
3.
Disconnect the DRL connector (A).

Hyundai Palisade. Repair procedures

4.
Remove the DRL from the vehicle.

Hyundai Palisade. Repair procedures

Installation
1.
Install the DRL.
2.
Install the front bumper.
3.
Connect the negative (-) battery terminal.

    Other information:

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Auto Defogging Sensor

    Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intak

    Hyundai Palisade (LX2) 2020-2025 Service Manual: General safety information and caution

    General Safety Information and Caution 1. Be careful when driving the vehicle using the smart cruise control system as follows. (1) On curves or inclines/declines • The smart cruise control system may have limits to detect

    Categories

     
    Copyright © 2025 www.hpalisadelx.com - 0.0138