Hyundai Palisade (LX2): Power Liftgate / Closing the liftgate
The power liftgate will close automatically by doing one of the following:
Smart key liftgate unlock button
Press and hold the liftgate unlock button on the smart key when the liftgate is opened. The liftgate will close and lock automatically.
Power liftgate inner button
Press the power liftgate inner button for approximately 1 second. The liftgate will close and lock automatically.
Power liftgate button
Press the power liftgate button for approximately one second. In order to suddenly stop the movement of the liftgate while it is operating, quickly press the power liftgate button.
In order to suddenly stop the movement of the liftgate while it is operating, quickly press the power liftgate button.
The power liftgate will open automatically by doing one of the following: Smart key liftgate unlock button Press and hold the liftgate unlock button on the smart key.
The power liftgate does not open when the vehicle is in motion. WARNING The chime will sound if you 3 drive with the liftgate opened. Stop your vehicle immediately at a safe place and check if your liftgate is opened.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear mode actuator connector (A), loosen the mounting screws and remove the rear mode ac
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Rain Sensor
- Rear Bumper Cover
- How to reset the power liftgate
- New on site
- Most important about car
