Hyundai Palisade (LX2): TRIP Computer (Cluster type A and type B) / Average fuel economy/ Instant fuel economy

Hyundai Palisade. Instant fuel economy

Average Fuel Economy (1)

  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset.
  • The average fuel economy can be reset both manually and automatically.

Manual reset

To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed.

Automatic reset

To automatically reset the average fuel economy, select between "After Ignition" or "After Refueling" in the User Settings mode in the cluster LCD display.

- After ignition: When the engine has been OFF for 4 hours or longer the average fuel economy will reset automatically.
- After refueling: The average fuel economy will reset automatically after adding 1.6 gallons (6 liters) of fuel or more and after driving speed exceeds 1 mph (1 km/h).

Information

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.

Instant Fuel Economy (2)

• The instantaneous fuel economy is displayed according to the bar graph in the LCD display while driving.

    The trip computer is a microcomputer- controlled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.

    This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Blower Motor

    Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear blower motor connector (A), loosen the mounting screws and remov

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures

    Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0191