Hyundai Palisade (LX2): Smart Cruise Control With Stop & Go System / Adjusting the Sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the 'User Settings → Driver Assistance → SCC Reaction → Fast/Normal/Slow' on the LCD display. You may select one of the three stages you prefer.
• Fast:
Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed.
• Normal:
Vehicle speed following the front vehicle to maintain the set distance is normal.
• Slow:
Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed.
Information
The last selected speed sensitivity of the smart cruise control is remained in the system.
CRUISE: Turns cruise control system on or off. RES+: Resumes or increases cruise control speed. SET-: Sets or decreases cruise control speed. : Sets vehicle-to-vehicle distance.
The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps: 1. Push the CRUISE button on the steering wheel to turn the system on.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Intake Actuator
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Cruise Control (CC) Switch
Components and components location Components 1. Remote control switch (Audio swtich) 2. Remote control switch (Cruise control switch) Schematic diagrams Circuit Diagram Repair procedures Removal 1.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Engine Mechanical System
- Electrochromatic Mirror (ECM) with homelink system
- General Tightening Torque Table
- New on site
- Most important about car
