To unlock the liftgate :
1.Press and hold the Liftgate Unlock button (3) on the remote key for more than one second.
2.The hazard warning lights will blink two times and the liftgate will open.
3.Once the liftgate is opened and then closed, the liftgate will automatically re-lock after 30 seconds.
Information
The word "HOLD" is written on the button to inform you that you must press and hold the button for more than one second.
To unlock your vehicle : 1.Press the Door Unlock button (2) on the remote key. 2.The driver's door will unlock. The hazard warning lights will blink two times.
Panic button Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights flash for about 30 seconds. To cancel the panic mode, press any button on the remote key.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.