Hyundai Palisade (LX2): Remote Key / Unlocking your vehicle
To unlock your vehicle :
1.Press the Door Unlock button (2) on the remote key.
2.The driver's door will unlock. The hazard warning lights will blink two times.
Two Press Unlock Feature
The priority for unlocking the driver door only, or unlocking all the doors with one press may be adjusted in the User Settings mode in the cluster LCD display.
The Two Press Unlock feature, when enabled, will require the user to press the door unlock button once for driver door only and twice for unlocking all the doors.
Select or Deselect the Two Press Unlock feature in the User Settings mode in the cluster LCD display. The option can be found under the following menu:
User Settings âžž Door âžž Two Press Unlock
The Two Press Unlock feature can also be enabled or disabled by pressing the door lock and unlock buttons simultaneously on the Key FOB:
Press and hold both the Door Lock button and the Door Unlock button simultaneously until the hazard warning lights blink.
This will enable or disable the Two Press Unlock feature. Repeat this procedure to enable/disable the mode again.
Information
After unlocking the doors, the doors will automatically relock after 30 seconds unless a door is opened.
â– Type A â– Type B Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. 1. Door Lock 2.
To unlock the liftgate : 1.Press and hold the Liftgate Unlock button (3) on the remote key for more than one second. 2.The hazard warning lights will blink two times and the liftgate will open.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation
Description Surround View Monitor (SVM) is the system that allows video monitoring of 360 degrees around the vehicle. The system includes 4 ultra optical camera mounted around the vehicle (front, both sides, rear). The video from these cameras are applied with distortion compensation, time point conversion, and video me
Hyundai Palisade (LX2) 2020-2026 Service Manual: Description and operation
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Engine Mechanical System
- Rear Bumper Cover
- How to reset the power liftgate
- New on site
- Most important about car
