Hyundai Palisade (LX2): Lighting System / License Lamps
Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the license lamp lens from the panel after loosening a screw.
|
| 3. |
Replace the bulb (B) after removing the license lamp (A).
|
| Installation |
| 1. |
Install the bulb.
|
| 2. |
Install the license lamp lens.
|
Components and components location Components Repair procedures Inspection Rheostat Switch 1. Disconnect the negative (-) battery terminal.
Repair procedures Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Temperature Control Actuator
Description and operation Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Blower Motor
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- How to reset the power liftgate
- Emergency liftgate safety release
- ISG (Idle Stop and Go) system
- New on site
- Most important about car
